EspañolHYDRO BLUE PUTTY
Rebuild, seal, block and stick different types of materials and shapes
IVEGOR Hydro blue Putty
Special for pool repair
It is used to rebuild, seal, block and stick different types of materials and shapes.
Specially designed to be used in pools.
Protection of any surface type, either exposed to the air or in constant or alternated immersion in sweet or sea water.
It is activated when mixing its two components, the basic component (white) and the curing agent (blue).
Frecuently used applications
- Underwater
- Plumbing.
- Swimming pool maintenance.
- Industrial maintenance.
Hydro blue Putty features
- No need to empty pools to be applied.
- Can resist temperatures until 200º C.
- Resistant to water, oils, solvents and diluted acids and alcalis.
Preparation
Step 1: Mix the same amount of basic component (white) and curing agent (blue).
Step 2: Mix both components, kneading the mixture.
Step 3: Once you obtain a homogeneous blue mass (without streaks or seams), it can be used for about 20 minutes.
Application
With moist hands and gloves, you can model and spread the mixture, giving it the desired shape and thickness.
It is convenient to press the mixture while it is extended to improve adherence.
We can apply it over dry and wet surfaces, in water or in air.
Surfaces must be clean, without oxides, grease, paint, impurities or other defects that inhibit the correct adhesion of the putty.
Sanding,scratching, filing or other procedures to get the surface ready will improve its adhesion.
IVEGOR Hydro blue Putty packaging
Set (kit): 500g (250g + 250g).
Set (kit): 1 Kg (500g + 500g).
Set (kit): 2 Kg (1Kg + 1Kg).
Set 10 Kg (5Kg + 5Kg).
If you are interested in bigger amounts, please contact us.
